The "wrong port error" typically occurs when attempting to connect two Wally receivers directly to the Trav'ler antenna. In this scenario, the receiver connected to port 'C' will function correctly, but the receiver connected to port 'A' will not.

The Solution

To resolve the "wrong port error" and enable the use of multiple Wally receivers with your Trav'ler antenna, you need to install a Channel Stack Splitter kit. This kit allows you to properly distribute the satellite signal to multiple receivers, ensuring they all receive the necessary data to function correctly.

Additional Considerations

• If you encounter the "wrong port error," double-check that you are not trying to connect multiple Wally receivers directly to the antenna without the Channel Stack Splitter kit.
• If you have installed the splitter kit and still experience issues, refer to the comprehensive troubleshooting guide for "No Signal to Receiver(s)" to address potential cable or configuration problems. Troubleshooting: Winegard Trav'ler Pro No Signal to Receiver(s)

By following these guidelines, you can effectively troubleshoot and resolve the DISH "wrong port error" on your Winegard Trav'ler Pro system, ensuring uninterrupted satellite TV service for all connected receivers. If you have any further questions or require additional assistance, don't hesitate to submit a Support Ticket to Winegard customer support for expert guidance.