how to stow winegard traveler pro antenna with rv halo app

How to Stow the Winegard Trav'ler Pro using the RV Halo App

Stowing your Winegard Trav'ler Pro antenna when not in use is essential to protect it from damage during travel or inclement weather. Here's how to stow it using the RV Halo app:

Prerequisites:

  • The Trav'ler Pro should be properly installed and connected to your RV's power source.
  • The RV Halo app should be installed on your smartphone or tablet and connected to the Trav'ler Pro via Bluetooth.

Procedure:

  1. Open the RV Halo App: Launch the RV Halo app on your device and ensure you're logged in.

  2. Select the Trav'ler Pro: In the app's device list, locate and tap on your Trav'ler Pro antenna.

  3. Initiate the Stow Command: Look for and tap the "Stow" button. (The exact button label might vary slightly depending on the app version.)

  4. Confirm the Stow Command: The app might prompt you to confirm that you want to stow the antenna. If so, tap "Yes" or "Confirm."

  5. Monitor the Stowing Process: The antenna will begin retracting and stowing itself. You can monitor the progress in the app, and it will usually indicate when the stowing process is complete.

Important Notes:

  • Obstructions: Ensure there are no obstructions around the antenna that could hinder the stowing process.
  • Manual Stow: If you're unable to stow the antenna using the app, consult the Trav'ler Pro user manual for instructions on how to perform a manual stow.
  • Troubleshooting: If you experience issues with stowing, check the following:
    • The antenna has power.
    • There are no error messages in the app.
    • The antenna isn't obstructed.
  • Contact Support: If you're unable to resolve the issue, submit a Support Ticket.

By following these simple steps, you can easily stow your Winegard Trav'ler Pro antenna using the RV Halo app, ensuring its safety and longevity. Remember to stow the antenna before traveling or when not in use to prevent any potential damage.