fix "wrong port error" on winegard dish traveler with channel stack splitter kit

Troubleshoot: Winegard DISH Trav'ler Wrong Port Error

The "Wrong Port Error" on a Winegard DISH Trav'ler occurs when attempting to connect two Wally receivers directly to an antenna that has a Hybrid LNB. In this scenario, the receiver connected to port C will function correctly, but the one connected to port A will not.

The Solution

To use multiple Wally receivers with your DISH Trav'ler, you need to install a Channel Stack Splitter Kit. This kit allows proper signal distribution to multiple receivers. You can purchase the Channel Stack Splitter Kit from the Winegard website or through authorized retailers.

Key Points

  • The "Wrong Port Error" specifically arises when connecting two Wally receivers directly to the antenna without the necessary splitter kit
  • The Channel Stack Splitter Kit is essential for using multiple Wally receivers with the DISH Trav'ler
  • Purchase the kit from the Winegard website or authorized retailers to resolve this error

If you have any further questions or need assistance with the installation of the Channel Stack Splitter Kit, submit a support ticket to Winegard Customer Support.


    • Related Articles

    • Troubleshoot: Winegard DISH Trav'ler No Signal to Receivers

      A "No Signal to Receivers" issue on a Winegard DISH Trav'ler can stem from various factors, including the type of LNB (Low-Noise Block downconverter) and receiver you're using. The troubleshooting process involves identifying your specific setup and ...

    • DISH Trav'ler Pro: Wrong Port Error

      The "wrong port error" typically occurs when attempting to connect two Wally receivers directly to the Trav'ler antenna. In this scenario, the receiver connected to port 'C' will function correctly, but the receiver connected to port 'A' will not. ...

    • Troubleshoot: Winegard DISH Trav'ler Antenna Not Locking Onto Signal

      The "Antenna Not Locking Onto Signal" error on a Winegard DISH Trav'ler can be caused by several factors, including issues with the cable connections or the antenna itself. The troubleshooting process involves a series of checks to isolate the root ...

    • Troubleshoot: Winegard DirecTV Trav'ler No Signal to Receivers

      The No Signal to Receivers issue on a Winegard DirecTV Trav'ler can disrupt your satellite TV viewing. The troubleshooting process involves a series of checks to isolate the root cause of the problem. The first step is to check if the antenna ...

    • Troubleshoot: Winegard DirecTV Trav'ler 775 or Cannot Detect SWM

      The "775" or "Cannot Detect SWM" error on a Winegard DirecTV Trav'ler indicates that the receiver is unable to communicate with the LNB (Low-Noise Block downconverter). The following troubleshooting steps can help resolve this issue. Troubleshooting ...