Troubleshooting WiFi Ranger Cellular Connectivity | WiFi Ranger Support

Troubleshooting: WiFi Ranger Not Connecting to Cellular

If your WiFi Ranger is not connecting to cellular data, follow these troubleshooting steps:

  1. Check the Control Panel:

    • Connect to the WiFi Ranger's SSID and access the webUI at mywifiranger.com.
    • If the Control Panel shows "Using Cellular Data" under the Cellular heading, the system is already connected to cellular. If you still can't access the internet, escalate to Tier 2 support.
  2. Verify Modem Detection and Configuration:

    • If not connected to cellular, go to the 'Setup' tab.
    • Ensure the 'Enabled' box is checked on the Cellular line that shows a 'Detected Modem'.
    • Click the gear icon on that line.
    • If using Winegard FreedomGO data, the data plan should read "Winegard FreedomGO - AT&T".
    • For other carriers, it will read "My Data Plan", and you'll need to enter the APN manually.
  3. Check Firmware Version (For FreedomGO Users):

  4. Attempt Cellular Connection:

    • Go to the 'Main' tab, under the Cellular heading make sure the correct cellular connector is selected in the drop down and click 'Connect'.
    • If the system fails to connect, go back to the setup tab. Click the 'gear' icon for the correct cellular line and click 'Forget Cellular Device' then reboot the system. When it powers back on try connecting to cellular.
    • If the system fails to connect again, go to the setup tab. Click the 'gear' icon for the cellular line and click 'Clear SIM Details' then reboot the system. When it powers back on try connecting to cellular.
    • If you are still unable to connect, submit a support ticket to Winegard Customer Support for additional assistance.

Additional Considerations for Dual Router Systems:

  • If the WFRControl config shows as "Currently Not Connected", the system might be hooked up incorrectly.
  • Refer to the diagrams in the Converge manual to ensure the ethernet cable is connected to the correct port on the indoor router.

Important Notes:

  • The initial data plan sign-up for FreedomGO must be done through the WiFi Ranger system and requires internet access. Ensure the WiFi Ranger is connected to a local wireless network before proceeding. WiFi Ranger: Purchasing FreedomGO Data Plans for the First Time
  • For detailed instructions on updating firmware, purchasing FreedomGO data, or configuring cellular settings for specific scenarios (SIM in indoor/outdoor unit), check the How-To section under WiFi Ranger routers on our knowledgebase.

If you have followed these steps and are still experiencing issues connecting to cellular data, submit a support ticket to Winegard Customer Support for additional assistance.


    • Related Articles

    • Troubleshooting: WiFi Ranger Not Connecting to WiFi

      The WiFi Ranger is designed to provide seamless internet connectivity, but encountering issues connecting to a WiFi network can disrupt your online experience. This guide will walk you through troubleshooting steps to help you resolve this problem. ...
    • WiFi Ranger: Configuring Cellular Connectivity

      Activating and configuring cellular data on your WiFi Ranger allows you to access the internet in locations without campground WiFi. Here's a guide to get you started: Before You Begin: Ensure you have a SIM card compatible with your WiFi Ranger ...
    • Troubleshooting: Winegard Router Not Connecting to Cellular

      Issue: Your Winegard router is not connecting to the cellular network, even though you have a SIM card inserted and an active data plan. Possible Causes: SIM Card Issues: The SIM card might be inserted incorrectly. The SIM card could be damaged or ...
    • WiFi Ranger Everest Router: Ultimate Mobile Connectivity

      The WiFi Ranger Everest is a high-performance router designed for those who demand the best in mobile connectivity. This powerful device combines exceptional range, speed, and flexibility to deliver unparalleled internet access on the go. Key ...
    • WiFi Ranger: Connecting to Local WiFi

      WiFi Ranger devices act as a bridge between your campground's WiFi and the devices inside your RV. Here's how to get your WiFi Ranger up and running: What You'll Need: Your WiFi Ranger's SSID and password, found on a sticker on your WiFi Ranger. A ...