WiFiRanger: Show or Hide Advanced Features in Your Control Panel

WiFiRanger: Enabe/Disable Advanced Features

The WiFiRanger Control Panel provides access to a range of settings to customize your network experience. By default, certain advanced features may be hidden to simplify the interface for basic users. However, if you need to access these settings, you can easily enable or disable their visibility.

Toggle Advanced Features Visibility

  1. Connect: Ensure your computer or device is connected to the WiFiRanger network.
  2. Open Browser: Launch your preferred web browser (Chrome, Firefox, Safari, etc.).
  3. Access Control Panel: Type mywifiranger.com into the address bar and press Enter. Wait for the Control Panel to load.
  4. Navigate to Setup: Click on the "Setup" tab.
  5. Find System Preferences: Scroll down the page until you locate the "System Preferences" section.
  6. Toggle: Toggle the "Hide Advanced Features" option to "On" or "Off" depending on your preference.
  7. Save Changes: Click the "Save Changes" button at the bottom of the page.

Important Notes

  • Enabling advanced features will reveal additional settings and options within the Control Panel.
  • Disabling advanced features will hide these additional settings, returning the interface to its simplified state.
  • Changes made to advanced features will remain in effect even when they are hidden.
  • Hiding or showing advanced features only affects their visibility, not their functionality.

By following these simple steps, you can tailor the WiFiRanger Control Panel to your specific needs and preferences.


    • Related Articles

    • WiFiRanger: Failover Setup

      Failover is a feature that helps your WiFiRanger automatically recover from internet connection problems. You can customize how it works by following these steps: 1. Access the Control Panel Connect your device to the WiFiRanger network. Open a web ...

    • WiFiRanger: WFRControl Sync SSID

      The Sync SSID feature on your WiFiRanger allows you to control whether your indoor and outdoor routers broadcast the same Wi-Fi network name (SSID) and password, creating a seamless mesh network. Here's how to enable or disable this feature: Steps ...

    • WiFi Ranger: Connecting to Local WiFi

      WiFi Ranger devices act as a bridge between your campground's WiFi and the devices inside your RV. Here's how to get your WiFi Ranger up and running: What You'll Need: Your WiFi Ranger's SSID and password, found on a sticker on your WiFi Ranger. A ...

    • Troubleshooting: Winegard Router WebUI/Control Panel Not Loading

      Issue: You're unable to access the WebUI (web-based user interface) or control panel of your Winegard router, even after entering the correct IP address in your web browser. Possible Causes: Network Connectivity Issues: There might be problems with ...

    • WiFiRanger: Forgetting a Wi-Fi Network

      If you need to remove a saved Wi-Fi network from your WiFiRanger's memory (e.g., due to a password change or incorrect entry), follow these steps: Connect: Ensure your computer or device is connected to the WiFiRanger network. Open Browser: Launch ...