Winegard Router Software: A Guide to Software Versions

Winegard Router Software: A Guide to Software Versions

Winegard routers, essential for RV and mobile connectivity, require up-to-date software (firmware) for optimal performance and feature access. Here's how to navigate the available versions:

Understanding Available Software Versions

Winegard router software is model and hardware specific. The main models are:

  1. 1st Generation Connect
  2. ConnecT 2.0/Connect 2.0 5G
  3. Gateway/Gateway 5G

ConnecT 2.0 and Gateway routers can have different hardware versions internally:

  • Atheros
  • Aztech

Identifying Your Hardware Version

  • Check the Default SSID: The last 6 characters of your router's default SSID (e.g., Winegard2ghzD36917) indicate the hardware:
    • Starts with "D": Atheros board
    • Starts with "C": Aztech board

Downloading the Software

Please use the following links to download the latest firmware for your specific Winegard router model and hardware version:

  • 1st Generation Connect:

    • wgex-both-20230616 - Current Version
      • Version Release Notes:
        • Fixed DNS access during VPN over cellular

  • ConnecT 2.0 & Gateway (Atheros):

    • lede-both-20240315 - Current
      • Version Release Notes:
        • Fixed modem update error with Verizon SIMs
        • Added support for software updates via RV Halo app
  1.       lede-both-20230908
    1. Version Release Notes:
      1. Add support for Multi-Wan
      2. Added Ethernet LAN/WAN Toggle
      3. Added IPv6 Toggle

  • ConnecT 2.0 & Gateway (Aztech):   

    • lede-aztech-20260109 - Current Version
      • Version Release Notes:
        • Fixes MQTT reporting date issue (minimal user impact)
    • lede-aztech-20251121
      • Version Release Notes:
        • Fixes to modem driver
    • lede-aztech-20250822
      • Version Release Notes:
        • Multiwan fixes
        • Added UI support for FreedomGO T-mobile 5G unlimited plan
        • Updates to GPS and MQTT reporting 
        • Minor bug fixes
    • lede-aztech-20250516
      • Version Release Notes:
        • Added Status LED button to system page to enable/disable LED
        • Updated Ethernet Setting for dual and single ethernet port models
        • Added support for downloading modem updates over WiFi
        • Added improvements for 5G Cellular modem
    •  lede-aztech-20240927
      1. Version Release Notes:
        1. UI Redesign
        2. Added setup wizards to Help section
    •      lede-aztech-20240626
      • Version Release Notes:
        • Added support for Sensor pack Bluetooth dongle
  1.       lede-aztech-20240315
    1. Version Release Notes:
      1. Fixed modem update error with Verizon SIMs
      2. Added support for software updates via RV Halo app

By understanding your router model and hardware version, you can ensure you're using the correct software and enjoying optimal performance.

Manual Software Update Process

Before You Start:

  • Download the necessary update file provided by Winegard.
  • Use the images below to determine the operating system and use the appropriate steps below. If your login looks like the first image below proceed with the section labeled New OS Steps, if it looks like the second image skip to the Original OS Steps section.

     
 
New OS
Original OS
New OS

  1. Access the Admin Interface: Open a web browser and go to 10.11.12.1. Log in with your admin password (default is "admin").

  2. Navigate to System Page:

    • Use the Navigation menu on the left. If on mobile tap the three dashes in the upper right corner to view the Navigation menu
    • Select "System".

  3. Manage Software:

    1. Select Manage Software, then "Click here to manually update your ConnecT software"

  4. Choose the File:

    • Click the "Browse" button.
    • Select the Winegard update file that you downloaded earlier.

  5. Update Software:

    • Select "Upgrade Now" to initiate the update.

  6. Verify and Proceed:

    • A verification prompt will appear. Select "Proceed".

  7. Wait for Reboot:

    • The system will load the new software and reboot. You might need to reconnect to the Winegard network afterward. You may also need to log in again with your admin password.

  8. Confirmation:

    • Once logged back in, navigate to the About page and verify the software version matches the file name used on step 3.

Important:

  • Do not interrupt the update process or power off the router during the update.

Staying Up-to-Date

  • Check for Updates Regularly: Visit the Winegard support website periodically to see if newer firmware versions are available.
  • Enable Automatic Updates (if available): Some Winegard routers may have an option to automatically install updates.

Original OS

  1. Access the Admin Interface: Open a web browser and go to 10.11.12.1. Log in with your admin password (default is "admin").

  2. Navigate to Update Page:

    • Use the "Navigate to Page" dropdown menu.
    • Select "Update Software".

  3. Choose the File:

    • On the software update page, click the "Choose File" button.
    • Select the Winegard update file (starts with "WGEX") that you downloaded earlier.

  4. Update Software:

    • Back on the software update page, click "Update Software".

  5. Verify and Proceed:

    • A verification prompt will appear. Select "Proceed".

  6. Wait for Reboot:

    • The system will load the new software and reboot. You might need to reconnect to the Winegard network afterward. You may also need to log in again with your admin password.

  7. Confirmation:

    • Once logged back in, navigate to the About page and verify the software version matches the file name used on step 3.

Important:

  • Do not interrupt the update process or power off the router during the update.

Staying Up-to-Date

  • Check for Updates Regularly: Visit the Winegard support website periodically to see if newer firmware versions are available.
  • Enable Automatic Updates (if available): Some Winegard routers may have an option to automatically install updates.